ICON 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.
ICON’s 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Featuring one-piece impact extruded aluminum cylinders, these 2.5 Aluminum Series shocks offer lighter weight, improved corrosion resistance, and a more uniform finish than traditional plated steel cylinders. Like all ICON'S Shock Absorbers, 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. ICON's exclusive Compression Damping Dual Speed (CDXS) valves are included for precisely dialing in your suspension performance. CDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness.
  • 6061 aircraft grade aluminum CNC machined components
  • One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
  • 7/8” diameter induction hardened, chrome plated shock shaft
  • Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
  • PTFE lined spherical bearings and application specific mounting hardware
  • Premium grade shock oil for consistent suspension damping along a wide temperature range
  • 100% Rebuildable and revalveable
  • ICON CDXS equipped for independent adjustability of high speed and low speed compression force for handling response and aggressiveness
  • Nitrogen charged monotube design with remote reservoir
  • Double-sealed Schrader caps reduce risk of damage
  • One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
  • ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression

Information:

TECH NOTE: Compatible with 0-1.5" of rear lift on Tacoma TRD Pro

Application Summary:

Year Make/Model
2005-2023 Toyota Tacoma
Attributes
AAP_UDA_12 EA
AAP_UDA_22 1
AAP_UDA_4 55
Active or Passive Suspension Passive
Add-On Part 252012 - -4 TO -10 HOSE SHIELD KIT, 252008 - 2.5 X 13 SHOCK BOOT BLACK (PAIR)
Adjustable Yes
Adjustable Compression Yes
Adjustable Damping Yes
Adjustable Rebound No
Boot Included NO
Bore Diameter 2.25
California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Compressed Length 14.98
Country of Origin (Primary) US
Cylinder Color Gray
Cylinder Diameter 2.5
Cylinder Material Aluminum
Damping Adjustment Type Dual Speed/Manual
Damping Type Oil
Extended Length 24.31
External Reservoir Yes
Gas Charged Yes
Grade Type Performance
Harmonized Tariff Code (Schedule B) 8708807000
Hazardous Material Code N
Life Cycle Status Code Available to Order
Lower Mount Type EYELET
Mounting Hardware Included Yes
NAFTA Preference Criterion Code C
Reservoir Type Remote
SDR Required Flag N
Service Parts 252001 - 2.5 FIXED SPANNER WRENCH, 191016 - 7.5" FINNED RESI UPGRADE KIT
Shaft Diameter 0.875
Shaft Material Chrome
Shock Absorber Body End Measuring Point Shoulder of Stem
Shock Absorber Rod End Measuring Point CENTER OF EYELET
Stroke Length Rear 9.33
Tube Outside Diameter 2.5
Upper Mount Type Stem
Valving Type Digressive
Warranty Time 1
GTIN 00840103435978

Write a review.

Note: HTML is not translated.
    Bad           Good