Old Man Emu MT64 Shock Absorber Rear
MT64 is specifically designed to cater to the needs of overland and heavy vehicles with extreme added weight, offering unparalleled load handling capabilities and vehicle-specific damping, tuned for different loads and vehicle setups. Multiple snap-ring grooves in the strut body allow for different spring seat positions, providing 0-3 inches of lift when paired with coil springs (application specific). These cutting-edge shocks are built to handle the unique challenges faced by vehicles equipped with campers, toppers, tents, and rack systems. These additions create a dynamic shifting load, both in terms of front-to-back and side-to-side movements. MT64 is the ultimate overlanding authority, designed for the traveler who wants a smooth ride and comfort both on and off-road. Overlanding demands shocks that can handle all conditions, day after day, and that is what MT64 is designed to do.
- Monotube with a massive 2.8 inch body allowing for more oil and accurate shock tuning
- Adjustable spring seat offers 0-3 inch of lift depending on the application
- Aerospace grade aluminum body dissipates heat fifteen times faster than steel, and increases protection against stone damage
- Forged body cap and rod ends reduce weight while maintaining strength
- Digressive valving instantly reacts to changing surface conditions to maximize performance
- Smooth controlled ride for everyday and long-distance driving to reduce fatigue and improve driver and passenger comfort
- Vehicle specific tuning
- Direct replacement for stock and aftermarket lift kit
Application Summary:
| Year |
Make/Model |
| 2003-2009 |
Toyota 4Runner |
| 2007-2014 |
Toyota FJ Cruiser |
| Attributes |
| Add-On |
N/A |
| Adjustable Damping |
No |
| Body Size |
2.8 in |
| Bushes |
Natural rubber |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color |
Grey |
| Compressed Length |
15.4 in |
| Country of Origin (Primary) |
TH |
| Design |
Monotube |
| Emission Code |
Legal US |
| Extended Length |
23.5 in |
| Finish |
Type III Hard Anodized |
| Hazardous Material Code |
N |
| Installation Time |
15 minutes |
| Life Cycle Status Code |
Available to Order |
| Lift Height |
0-3 in |
| Lower Mount Bush Kit |
VD50010045SP |
| Lower Mount Type |
Eye |
| Material |
Aluminum |
| Position |
Rear |
| Reservoir |
Internal |
| SDR Required Flag |
N |
| Seals |
Independent wiper |
| Shaft Guard Replacement |
VD31010260SP |
| Shaft Size |
7/8 in |
| Top Mount |
OEM |
| Type |
Shock |
| Upper Mount Bush Kit |
VM50010005SP |
| Upper Mount Type |
Pin |
| Valving |
Digressive |
| Warranty Time |
3 |
| GTIN |
09332018106988 |
