7 Inch Lift Kit - Bracket - Magneride - Cast Steel - GMC Sierra 1500 Denali (14-16)
There s no better way to deck out that new truck you worked so hard for than with the aggressive stance and jaw-dropping ride height of Rough Country's 7-inch Suspension Lift for GMC Sierra Denali 1500 Pickups equipped with Magnetic Ride Control. This massive lift is designed to retain your stock track width! This affords your truck the ability to run up to an impressive 35-inch tire on factory 20-inch wheels, and gives you a nearly limitless choice in aftermarket wheels and tires that other kits just can't fit. This kit ships with EVERYTHING you need to give your new truck the aggressive stance and capabilities it deserves
  • Increased ground clearance
  • Maintains stock track width.
  • Can run factory 20-inch wheels.
  • Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
  • Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem.

Information:

Requires cutting and drilling. If wider than 35x12.50 tires are used, offset wheels will be required and trimming may be required. 18-inch or larger wheels are required. Please view installation instructions for complete information on proper tire/wheel combinations. If truck is equipped with a mass damper on the front differential, the damper must be removed. ONLY fits models with factory steel knuckles and control arms. ONLY fits GMC Denali models with Magnetic Ride Control.

Application Summary:

Year Make/Model
2014-2016 GMC Sierra 1500
Attributes
California Proposition 65 WARNING: Cancer - www.P65Warnings.ca.gov
Category Susp Lift Kits 4wd, Susp Lift Kits 4wd
Country of Origin (Primary) US
Front Components Upper strut spacers, Lower strut spacers, Front crossmember, Rear crossmember, Control arm drop brackets, Differential drop brackets, Sway-bar drop brackets, Steering extension, Steering brace, Front skid plate, Lower skid plate, Hardware
Front Kit Componenets Upper strut spacers, Lower strut spacers, Front crossmember, Rear crossmember, Control arm drop brackets, Differential drop brackets, Sway-bar drop brackets, Steering extension, Steering brace, Front skid plate, Lower skid plate, Hardware
Front Kit Components Upper strut spacers, Lower strut spacers, Front crossmember, Rear crossmember, Control arm drop brackets, Differential drop brackets, Sway-bar drop brackets, Steering extension, Steering brace, Front skid plate, Lower skid plate, Hardware
Harmonized Tariff Code (Schedule B) 8708801600
Hazardous Material Code N
Install Time 8-10 hours
Life Cycle Status Code Available to Order
Lift/Drop Height 7 in.
NAFTA Preference Criterion Code B
Rear Components Fabricated anti-wrap lift blocks, Brake line relocation brackets, U-bolts, Hardware
Rear Kit Components Fabricated anti-wrap lift blocks, Brake line relocation brackets, U-bolts, Hardware
SDR Required Flag N
Shipping Group No Restrictions
Shipping Options No Restrictions
Ships in Multiple Boxes Y, Y
Tire & Wheel Size Combinations 35x12.50 R20 - 20x9, Offset: +12 to +18mm (Models equipped with Factory 18-inch or larger wheels must run 18-inch or larger wheels if changing to aftermarket wheels), 35x12.50 R20 - 20x9, Offset: +12 to +18mm (Models equipped with Factory 18-inch or larger wheels must run 18-inch or larger wheels if changing to aftermarket wheels)
Tire, Wheel, and Offset Info 295 70R18:Factory 18:6x5.5:-:0.25 Spacer; 295 60R20:Factory 20:6x5.5:-:0.25 Spacer; 315 70R17:17x9:6x5.5:+12:-; 35x12.50R17:17x9:6x5.5:+18:-; 315 70R17:17x9:6x5.5:+18:-; 295 70R18:18x9:6x5.5:+12:-; 35x12.50R18:18x9:6x5.5:+18:-; 295 70R18:18x9:6x5.5:+18:-; 35x12.50R18:18x9:6x5.5:+19:-; 35x12.50R18:18x9:6x5.5:+20:-; 35x12.50R20:20x9:6x5.5:+12:-; 35x12.50R20:20x9:6x5.5:+18:-; 295 60R20:20x9:6x5.5:+18:-; 35x12.50R20:20x9:6x5.5:+20:-; 295 60R20:20x9:6x5.5:+20:-
UTV Product N
GTIN 00843030130060

Write a review.

Note: HTML is not translated.
    Bad           Good