This heavy-duty snatch block is for use with wire rope only, up to 1/2-in. With an easy-to-see red finish, this rugged accessory will help you get the most out of your winch.
When used properly, this multi-purpose snatch block can double the pulling power of a winch and change the pulling direction without risk of damaging the rope. Snatch blocks also reduce amp draw and winch overheating. Applicable working load limit (WLL) is dependent on application: 4:1 Safety Factor WLL: 9,000 lbs. - per ASME B30.26 Standard (General rigging & lifting); 2:1 Safety Factor WLL: 18,000 lbs. - per BS 7901 Standard (Vehicle recovery, not overhead). Minimum breaking strength: 36,000 lbs. Max recommended winch capacity: 9,000 lbs.
When used properly, this multi-purpose snatch block can double the pulling power of a winch and change the pulling direction without risk of damaging the rope. Snatch blocks also reduce amp draw and winch overheating. Applicable working load limit (WLL) is dependent on application: 4:1 Safety Factor WLL: 9,000 lbs. - per ASME B30.26 Standard (General rigging & lifting); 2:1 Safety Factor WLL: 18,000 lbs. - per BS 7901 Standard (Vehicle recovery, not overhead). Minimum breaking strength: 36,000 lbs. Max recommended winch capacity: 9,000 lbs.
- Red finish increases visibility, all-metal construction is exceptionally durable
- Reduces heat build up and amp draw
- Change the pull direction without damaging rope
- Verify the correct WLL based on your application: 9,000 lbs. WLL for general rigging and lifting; 18,000 lbs. WLL for vehicle recovery and non-overhead pulling. Max recommended winch capacity: 9,000 lbs.
| Attributes | |
| ASIN | B00029XECK |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Capacity | 9,000, 18,000 |
| Compatibility | Winches With 12000 Pounds Capacity, Winches With 12000 Pounds Capacity |
| Country of Origin (Primary) | CN |
| Greasable | Yes, Yes |
| Harmonized Tariff Code (Schedule B) | 8708992000 |
| Hazardous Material Code | N |
| Includes Grease Port | Yes, Yes |
| Life Cycle Status Code | Available to Order |
| Maximum Line Diameter | 3/8, 3/8 |
| NAFTA Preference Criterion Code | B |
| Pulley Material | Steel, Steel |
| SDR Required Flag | N |
| Warranty Time | 12 |
| Weight Capacity (LB) | 24000 Pounds |
| GTIN | 00012748156406 |