This heavy-duty snatch block is for use with wire rope only, up to 3/4-inch. With an easy-to-see red finish, this rugged accessory will help you get the most out of your winch.
When used properly, this multi-purpose snatch block can double the pulling power of a winch and change the pulling direction without risk of damaging the rope. Snatch blocks also reduce amp draw and winch overheating. Applicable working load limit (WLL) is dependent on application: 4:1 Safety Factor WLL: 12,000lb - per ASME B30.26 Standard (General rigging & lifting); 2:1 Safety Factor WLL: 24,000lb - per BS 7901 Standard (Vehicle recovery, not overhead). Minimum breaking strength: 48,000lb. Max recommended winch capacity: 12,000lb.
  • Reduces heat build up and amp draw
  • Can be used to increase a winch's pulling ability by nearly 2x
  • Change pull direction with out damaging rope
  • Verify the correct WLL based on your application: 12,000 lbs. WLL for general rigging and lifting; 24,000 lbs. WLL for vehicle recovery and non-overhead pulling. Max recommended winch capacity: 12,000 lbs.
Attributes
ASIN B0002Z9SWE
Attachment Type Disc
California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Color Disc
Compatibility Winches With 16500 Pounds Capacity, Winches With 16500 Pounds Capacity
Country of Origin (Primary) CN
Finish Disc
Harmonized Tariff Code (Schedule B) 8708992000
Hazardous Material Code N
Includes Grease Port Yes, Yes
Life Cycle Status Code Available to Order
NAFTA Preference Criterion Code B
SDR Required Flag N
Warranty Time 12
Weight Capacity (LB) 33000 Pounds, 33000 Pounds
GTIN 00012748634904

Write a review.

Note: HTML is not translated.
    Bad           Good