87-95 Jeep YJ 2in Leaf Spring
This 4-leaf pack features anti-friction pads and center leaf spacer plates between each leaf to significantly decrease internal friction. The spring is designed to give 2 of lift for the front or rear of your YJ. Sold individually, bushings sold separately.
- 4-leaf design with military wrapped ends.Uses center leaf spacer plates between each leaf and anti-friction pads for smooth, quiet operation.Sold individually, bushings sold separately
Information:
Bushings NOT Included.
If installing 2" rear springs without any additional driveline modifications (ex: transfer case drop, SYE/CV driveshaft, motor mount lift) it is necessary to install 4 degree shims on the rear leaf springs to correct the rear driveline angle. See optional accessory section to add 4 degree shims and new center pin kit. (Shim Kit # U3001 - Center Pin Kit # U3010).
Part # J0200 is a single leaf spring - bushings are ubolts are not included. Choose from the selections below to build your complete leaf spring, bushing, and U-bolt package.
Application Summary:
| Year |
Make/Model |
| 1987-1995 |
Jeep Wrangler |
This item is a component of the following packages: ZONJ27, ZONJ27N
| Attributes |
| Alternate Part Number |
ZONJ0200 |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Center Pin Size |
.313 |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Eye To Center Front |
21.5" |
| Eye To Center Rear |
21.5" |
| Eye To Eye |
43.00 |
| Free Height |
6.50 |
| Front Eye Diameter |
1.50 |
| Hazardous Material Code |
N |
| Horizontal Position |
Front or Rear |
| Length |
N/A |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
B |
| Number Of Leafs |
4 |
| Overload Spring |
No |
| Pin Size |
N/A |
| Rear Eye Diameter |
1.50 |
| SDR Required Flag |
N |
| Wholesale Only |
No |
| Width |
2-1/2" |
| GTIN |
00711745600157 |
